In this 2nd video i push the liner lock further into the handle so there is more contact between the liner lock and the blade : it does lock better this way but who would do that each time he fires the knife ? And it still failed. After this test the knife didn’t work properly as you saw in the video : it’s very hard to retract the blade in the handle and it fires randomly when you push the button, or you have to hit the handle on something to make the blade go out. It’s now a pain in the a.. to open and close this knife. I hope you enjoyed thoses videos.

SCARAB MICROTECH ANGEL BLADE OTF CHINESE REPLICA Switch Knife & WATER TEST

The production date of this halo 3 is 07/2000. Never been used, only fired. The button lock holds up very well in this video.

As you can see, the lock of the halo 3 fails where the piranha’s and scarab’s lock did not, but it’s still better than the nemesis IV. After the video i disassembled the knife and besides the charging lever that is now hard to pull ( because of the hammer), the only damage i saw was on the button lock : it was a little bit damaged where there is a contact with the base of the blade. Otherwise, the knife can still be fired with no problem at all, it works normally.

Glass breaker test

Thank you for joining us in another video from The Hollow Grind. Please be sure to support us by purchasing all your Microtech Knives from us so that we can continue to bring you these videos. After a lot of talks, forum conversations, and doubts, I decided to take the plunge (get it) and conduct our own real world test on these QD Navy Seals Scarabs. We all have heard that these knives can fire underwater, but some have been told that the regular Scarabs can fire underwater as well. This video should take care of any doubts. Please be sure to visit us at www.thehollowgrind.com

Here is one of the best all round outdoor fixed blades you will find. Perfectly designed knife, feels awesome in hand, and a superb sheath. Not much more that a guy can ask for! The AUS-8 steel is not THE BEST steel out there, but it is more than adiquit. The cutting test that I will show you was done with a fresh razor edge, and at the end it was just shy of a razor edge, and still was in a spot or two. With a couple of minutes of honing it was back to it’s fullest and none the worse for wear. Notes: I have reprofiled that edge to 20 degrees although it will still be razor sharp without it, this just gives it a little bit of a sharper edge. During the test there was also a lot of cutting that I didn’t have time to show you, so AUS-8 steel is no slouch! I am giving this a 15/15 raiting

…

Cutting demo/test of SOG Twith II using 2 ply cardboard and pressure-treated wood. See part one for table-top review.

This is the cutting test/demo of the SOG Vision. To see the table-top, watch Part 1.